Winter is our slow season, so we thought that we would offer a one time sale of 10% off our already low prices. Many of these offerings are at or below our actual costs. These prices apply to in-stock AR rifles and pistols or custom builds from in-stock parts and do not apply to the commercially made handguns we offer. Call me at 517-548-9558 to ask any questions, discuss a custom build, or make a purchase. The 10% off sale ends 2-28-17

As always, flashlights, forward grips, bipods lasers, and other accessories can be added to any of our offerings for a small upcharge.

For further information or to purchase any of these guns, please contact Mike Chester at Chet’s Firearms of Howell, Michigan. chetarms@charter.net or phone 517-548-9558. Ask for Mike. Prices do not include shipping to your local FFL.

• • DISCLOSURE: Chet’s Firearms is a private company. VT promotes Chet’s Firearms and Adamas personnel design weapons offered by Chet’s, a federally licensed dealer. VT has NO financial interest in Chet’s Firearms and is NOT an owner, partner, or affiliate with Chet’s Firearms. All legal responsibilities for gun sales is that of Chet’s Firearms and NOT VT or VT Network

All prices are plus reasonable shipping, all sales require normal license procedures and are limited by laws in your area, please check.

Updated – Special note for California and New York residents: California has recently changed its classification of so-called “assault rifles” and now requires that they be registered before January of 2018. They have enumerated certain “features” that make a rifle into an “assault rifle.” These are essentially the same “features” that were designated in New York last year. As a result of these specifications, we have come up with a “featureless rifle” design. Essentially, this uses a special stock and a 10 round magazine and we feel that they can be legally sent to California or New York and don’t need to be registered as assault rifles. (Disclaimer – I am not making a representation of their legality as I am not a lawyer. The law has been written and there are still a few questions as to how the California Department of Justice will interpret and enforce it) Only one company currently makes this special stock, and as you can imagine, they are in very short supply. I have one on order to build a prototype which I will test and photograph to sell in a future listing, but for now, none of these AR offerings can be shipped to California or New York.  

6.5 Grendel Long Range Rifle

The 6.5 Grendel is the caliber that the military should be using as their primary combat rifle.

The 6.5mm Grendel (6.5×39mm) is an intermediate cartridge designed by Arne Brennan, Bill Alexander, and Janne Pohjoispää as a low recoil, high accuracy, 200-800 yard cartridge specifically for the AR-15 platform. It is an improved variation of the 6.5mm PPC. Since its introduction, it has proven to be a versatile design and is now expanding out into other platforms including bolt-action rifles and the Kalashnikov system.

Firing factory loaded ammunition loaded with bullets ranging from 90 to 129 grains(5.8–8.4 g), its muzzle velocity ranges from 2,500 ft/s (760 m/s) with 129- and 130-grain (8.4 g) bullets to 2,900 ft./s (880 m/s) with 90 gr (5.8 g) bullets (similar in velocity to a 5.56 mm 77-grain (5.0 g) round). This is a long-range round and is still supersonic at 1000 yards, making it an excellent long-range shooter.

The name “6.5mm Grendel” was a trademark owned by Alexander Arms until it was legally released to allow the cartridge to become SAAMI standardized.

Loadout:

• 20 Inch chrome-moly barrel with rifle-length gas system
• 15-inch slimline rail with removable rail sections
• Nickel-Boron bolt and bolt carrier
• Predator Stock
• Custom pistol grip
• Custom muzzle brake
• Stainless steel trigger group

Leupold Clone scope – 4-10X50 with red/green/blue illuminated reticle, 30mm tube – Very bright and sharp sight picture

One inch scope riser

20 round stainless steel magazine

$999 – Special 10% off price $899

AR-15 in AK-47 round

This is an AR-15 rifle that shoots the 7.62×39 round. This is the same round that is used in the AK-47.

Loadout:

• 16 inch chrome moly barrel in 7.62×39 caliber
• 12 inch super slimline keymod rail
• MOE stock
• Sportside upper receiver (no forward assist or dust cover)
• Custom pistol grip (the greenish one shown has been replaced with a black one like on the Grendel)
• Custom muzzle brake
• Barksa 3-9×40 scope
• 20 round stainless steel magazine

$829 – Special 10% off price $746

Loss Bleeder -Basic 5.56 Carbine

This is our version of a basic .223/5.56 AR-15 carbine. We call it our “Loss Bleeder.” Most of our offerings come fully equipped, but sometimes people already have optics or would like to “dress” their own gun so we are offering a limited number of “basic” carbines. Unlike most entry level ARs, we include a 10 inch Aluminum quad rail instead of a plastic hand guard. All of the functional components used in this gun are the same ones we use in our higher priced models. No optic is included though we have them available as an upgrade.

Loadout:

• 16 inch chrome moly barrel
• 10 inch quad rail with front cap
• Sport side upper receiver (no forward assist or dust cover)
• Standard AR pistol grip and adjustable stock
• 30 round magazine

$499 – Special 10% off price $449

Deluxe AR-15 pistol with 7.5 inch barrel

• 7.5 inch chrome moly barrel in .223/5.56 (shown with stainless barrel, but now in black)
• A-2 muzzle brake
• Standard upper receiver with forward assist and door
• 7 inch slimline rail with removable rail sections
• Sig Tac SBX Generation 2 arm brace mounted on special tube made for Sig Tac
• Custom pistol grip
• red dot scope
• 30 round magazine

Deluxe AR-15 pistol with 10.5 inch barrel

• 10.5 inch chrome moly barrel in .223/5.56
• A-2 muzzle brake
• Sport side upper receiver
• 10 inch slimline keymod rail
• Shockwave Blade arm brace mounted on KAK buffer tube made for Blade
• custom pistol grip
• red dot scope
• 30 round magazine

$709.00 – Special 10% off price $638

New – Bench Rest Cat

Factory Made Handguns

Brand New Ruger SR-40

Offered at the very special price of $399

Beretta Pico

Concealed Carry Cat – Discontinued Model (unfortunately)

.308 Rifles

High End Target/sniper AR-308 with 24 inch heavy barrel

There is only one of these available at the very reasonable price of $1599. – Special 10% off price $1439

.308 Carbine

Last one at this price

Loadout

• AR-308 16 inch chrome moly barrel
• MOE custom stock
• Custom pistol grip
• Full auto rated bolt carrier
• Removable carry handle with integral dual aperture sight (co-witnesses with front sight post)
• Barksa 3-9X40 scope mounted on removable rail
• 20 round magazine

Special price $999 – Special 10% off price $899

.308 AR Carbine, Field Equipped

16 inch phosphate coated chrome moly barrel in .308 caliber
13.5 inch keymod rail
Custom muzzle brake
UTG Harris style bipod
MOE adjustable stock
Custom pistol grip
3-9×40 Barksa scope
20 round magazine

$1229 – Special 10% off price $1106

.300 AAC (Blackout) Rifle

Loadout:

• 16 Inch phosphate coated chrome molly barrel
• 12 inch Slimline rail with removable rail sections
• “Punisher” muzzle brake
• Full Auto rated bolt carrier
• ACS stock
• UTG Rail Harris style bipod
• Magpul MOE pistol grip and trigger guard
• Leapers/UTG 3-9×32 “Bug Buster” scope with red/green illuminated reticle
• 30 round magazine

$839 – Special 10% off price $755

VT Equipped M4 Carbine – New updated model

We simply take a standard M4 Carbine and add over $300 in options, saving a trip to a gunsmith and months of screwing around. This is all anyone needs, affordable shooting, a decent optic, great ergonomics and NOTHING to replace and upgrade.

Loadout:

• 16” barrel M4 configuration
• 12” slimline Free Float Quad Rail with removable sections ($135 value)
• A2 muzzle brake
• Forged Aluminum upper and lower receiver
• Full automatic rated bolt carrier group
• MOE stock
• Custom pistol grip ($35 value)
• Barksa 3-9 X 40 military reticule scope ($125 value)
• 30 rd. Magazine

$699 – Special 10% off price $629

Michael Chester

Michael Chester is retired from his career in industrial technology. After graduating from college, he taught this subject until deciding that he preferred doing the job himself more than teaching it. At various times during his career, he has designed, built, installed, and repaired industrial manufacturing machinery. His specialty was in electrical and electronic controls.

After retiring, he concentrated more on his hobby of cooking and attended one of the top culinary schools in the US. Mike competed in bass fishing tournaments for several years but had to leave the sport due to an injury. As a certified barbecue judge, he gets to taste some of the best BBQs in the country and help select the winner. It is a tough job, but someone has to do it. He lives with his wife of over 30 years, and has 3 adult children and 2 grandchildren.